Abstract
An innovative permanent magnet synchronous motor rotor position detection method using d-q reference-frames derived from PWM inverter switching is presented based on carrier phase-shift PWM method. It also gives the development the polarity identification at standstill for permanent magnet synchronies motor in the rotary frame with position detected of the neutral voltage. The new technique detects the motor position from simple measurements of the neutral point voltage of the motor influenced by the variation of inductances with respect to rotor position. The transfer is derived with constant element and 2nd harmonic element of selfinductance and mutual-inductance between three phase inductances and the inductance of d-axis and q-axis. Theoretical studies are carried out and verified using experiment results with variation rotor position over one electrical cycle at standstill. Rotor position estimation from stator inductance variation with rotor position is effective in zero speed and low speed.
Similar content being viewed by others
Abbreviations
- a:
-
directional orientation of the system
- h:
-
strip thickness with strip thickness and strip thickness strip thickness
References
Johnson, J. P., Ehsani, M., and Guzelgunler, Y., “Review of Sensorless Methods for Brushless DC,” Proc. of Industry Applications Conference, 1999. Thirty–Fourth IAS Annual Meeting, pp. 143–150, 1999.
Sng, E. K. K., Liew, A.-C., and Lipo, T. A., “New Observer–Based DFO Scheme for Speed Sensorless Field–Oriented Drives for Low–Zero–Speed Operation,” IEEE Transactions on Power Electronics, Vol. 13, No. (5), pp. 959–968, 1998.
Consoli, A., Musumeci, S., Raciti, A., and Testa, A., “Sensorless Vector and Speed Control of Brushless Motor Drives,” IEEE Transactions on Industrial Electronics, Vol. 41, No. (1), pp. 91–96, 1994.
Parasiliti, F., Petrella, R., and Tursini, M., “Sensorless Speed Control of a PMSynchronous Motor Based on Sliding Mode Observer and Extended Kalman Filter,” Proc. of Thirty–Sixth IAS Annual Meeting Industry Applications Conference, pp. 533–540, 2001.
Bolognani, S., Oboe, R., and Zigliotto, M., “Sensorless Full–Digital PMSM Drive with EKF Estimation of Speed and Rotor Position,” IEEE Transactions on Industrial Electronics, Vol. 46, No. (1), pp. 184–191, 1999.
Dhaouadi, R., Mohan, N., and Norum, L., “Design and Implementation of an Extended Kalman Filter for the State Estimation of a Permanent Magnet Synchronous Motor,” IEEE Transactions on Power Electronics, Vol. 6, No. (3), pp. 491–497, 1991.
Consoli, A., Scarcella, G., and Testa, A., “Industry Application of Zero–Speed Sensorless Control Techniques for PMSynchronous Motors,” IEEE Transactions on Industry Applications, Vol. 37, No. (2), pp. 513–521, 2001.
Jang, J.-H., Sul, S.-K., Ha, J.-I., Ide, K., and Sawamura, M., “Sensorless Drive of SMPM Motor by High Frequency Signal Injection,” Proc. of Applied Power Electronics Conference and Exposition, pp. 279–285, 2002.
Kaneko, D., Iwaji, Y., Sakamoto, K., and Endo, T., “Initial Rotor Position Estimation of the Interior Permanent Magnet Synchronous Motor,” Proc. of Power Conversion Conference, pp. 259–264, 2002.
Jeong, Y.-S., Lorenz, R. D., Jahns, T. M., and Sul, S.-K., “Initial Rotor Position Estimation of an Interior Permanent–Magnet Synchronous Machine Using Carrier–Frequency Injection Methods,” IEEE Transactions on Industry Applications, Vol. 41, No. (1), pp. 38–45, 2005.
Schroedl, M., “Sensorless Control of ACMachines at Low Speed and Standstill Based on the Inform Method,” Proc. of Industry Applications Conference, pp. 270–277, 1996.
Corley, M. J. and Lorenz, R. D., “Rotor Position and Velocity Estimation for a Permanent Magnet Synchronous Machine at Standstill and High Speeds,” Proc. of Industry Applications Conference, pp. 36–41, 1996.
Harnefors, L. and Nee, H.-P., “A General Algorithm for Speed and Position Estimation of ACMotors,” IEEE Transactions on Industrial Electronics, Vol. 47, No. (1), pp. 77–83, 2000.
Linke, M., Kennel, R., and Holtz, J., “Sensorless Position Control of Permanent Magnet Synchronous Machines without Limitation at Zero Speed,” Proc. of IEEE 2002 28th Annual Conference of the Industrial Electronics Society, pp. 674–679, 2002.
Parasiliti, F., Petrella, R., and Tursini, M., “Sensorless Speed Control of Salient Rotor PMSynchronous Motor Based on High Frequency Signal Injection and Kalman Filter,” Proc. of IEEE International Symposium on Industrial Electronics, pp. 623–628, 2002.
Kereszty, T., Leppanen, V.-M., and Luomi, J., “Sensorless Control of Surface Magnet Synchronous Motors at Low Speeds Using Low–Frequency Signal Injection,” Proc. of the 29th Annual Conference of the IEEE Industrial Electronics Society, pp. 1239–1243, 2003.
Mei, T., Qu, K., and Whitley, M., “Control of Wheel Motors for the Provision of Light Rail Traction and Steering,” Proc. of UKACC International Conference on CONTROL, pp. 710–715, 2010.
Zhang, Z., Kuang, J., Wang, X., and Ooi, B.T., “Force Commutated HVDC and SVC Based on Phase–Shifted Multi–Converter Modules,” IEEE Transactions on Power Delivery, Vol. 8, No. (2), pp. 712–718, 1993.
Zhang, Z.-C. and Ooi, B.-T., “Multimodular Current–Source SPWM Converters for a Superconducting Magnetic Energy Storage System,” IEEE Transactions on Power Electronics, Vol. 8, No. (3), pp. 250–256, 1993.
Mercorelli, P., Kubasiak, N., and Liu, S., “Model Predictive Control of an Electromagnetic Actuator Fed by Multilevel PWM Inverter,” Proc. of IEEE International Symposium on Industrial Electronics, pp. 531–535, 2005.
Mercorelli, P., Kubasiak, N., and Liu, S., “Multilevel Bridge Governor by Using Model Predictive Control in Wavelet Packets for Tracking Trajectories,” Proc. of IEEE International Conference on Robotics and Automation, pp. 4079–4084, 2004.
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
About this article
Cite this article
Qu, K., Xu, G., Cha, S.W. et al. An Innovative Rotor Position Detection at Stand-Still and Low Speed with Carrier Phase-Shifted PWM Method. Int. J. Precis. Eng. Manuf. 19, 1281–1289 (2018). https://doi.org/10.1007/s12541-018-0152-6
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12541-018-0152-6