Abstract
In order to control the low frequency vibration of railway vehicles, a vertical two degrees of freedom (2DOF) low frequency dynamic vibration absorber (DVA) based on acceleration is proposed. Parameters of the dynamic vibration absorber are put forth to control the low frequency vibration of car body bouncing and pitching. Next, the acceleration power spectrum density (PSD) and ride quality of the car body are calculated based on the pseudo excitation method (PEM) and covariance algorithm, respectively. According to the requirement of 2DOF low frequency DVA, the isolators with high static low dynamic stiffness (HSLDS) are designed. A high-speed train dynamic model containing HSLDS isolators is established to validate the effects on the car body vibration. The results reveal that the 2D low frequency DVA can significantly reduce the vibration of the car body bouncing and pitching. Thus, the ride quality of the vehicle is increased, and passenger comfort is improved.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Yan B, Liu S, Pu H, et al. Elastic-plastic seismic response of crts ii slab ballastless track system on high-speed railway bridges. Sci China Technol Sci, 2017, 60: 865–871
Zhang Y D, Zhang J Y, Li T, et al. Investigation of the aeroacoustic behavior and aerodynamic noise of a high-speed train pantograph. Sci China Technol Sci, 2017, 60: 561–575
Zhou J, Shen G, Zhang H, et al. Application of modal parameters on ride quality improvement of railway vehicles. Vehicle Syst Dyn, 2008, 46: 629–641
Zhou J, Goodall R, Ren L, et al. Influences of car body vertical flexibility on ride quality of passenger railway vehicles. Proc Institution Mech Engineers Part F-J Rail Rapid Transit, 2009, 223: 461–471
Gong D, Zhou J, Sun W. On the resonant vibration of a flexible railway car body and its suppression with a dynamic vibration absorber. J Vib Control, 2013, 19: 649–657
Gong D, Zhou J, Sun W. Passive control of railway vehicle car body flexural vibration by means of underframe dampers. J Mech Sci Technol, 2017, 31: 555–564
Gong D, Zhou J, Sun W, et al. Method of multi-mode vibration control for the carbody of high-speed electric multiple unit trains. J Sound Vib, 2017, 409: 94–111
Shi H L, Luo R, Wu P B, et al. Application of dva theory in vibration reduction of carbody with suspended equipment for high-speed emu. Sci China Technol Sci, 2014, 57: 1425–1438
Dumitriu M. A new passive approach to reducing the carbody vertical bending vibration of railway vehicles. Vehicle Syst Dyn, 2017, 55: 1787–1806
Garg V K. Dynamics of Railway Vehicle Systems. New York: Academic Press, 1984
Carrella A, Brennan M J, Kovacic I, et al. On the force transmissibility of a vibration isolator with quasi-zero-stiffness. J Sound Vib, 2009, 322: 707–717
Carrella A, Brennan M J, Waters T P, et al. Force and displacement transmissibility of a nonlinear isolator with high-static-low-dynamicstiffness. Int J Mech Sci, 2012, 55: 22–29
Carrella A, Brennan M J, Waters T P, et al. On the design of a highstatic-low-dynamic stiffness isolator using linear mechanical springs and magnets. J Sound Vib, 2008, 315: 712–720
Huang X, Liu X, Sun J, et al. Vibration isolation characteristics of a nonlinear isolator using euler buckled beam as negative stiffness corrector: A theoretical and experimental study. J Sound Vib, 2014, 333: 1132–1148
Huang X, Liu X, Sun J, et al. Effect of the system imperfections on the dynamic response of a high-static-low-dynamic stiffness vibration isolator. Nonlinear Dyn, 2014, 76: 1157–1167
Huang X C, Liu X T, Hua H X. Effects of stiffness and load imperfection on the isolation performance of a high-static-low-dynamicstiffness non-linear isolator under base displacement excitation. Int J Non-Linear Mech, 2014, 65: 32–43
Palomares E, Nieto A J, Morales A L, et al. Numerical and experimental analysis of a vibration isolator equipped with a negative stiffness system. J Sound Vib, 2018, 414: 31–42
Meng L, Sun J, Wu W. Theoretical design and characteristics analysis of a quasi-zero stiffness isolator using a disk spring as negative stiffness element. Shock Vib, 2015, 2015: 1–19
Meng L, Liu F. Design and analysis of a quasi-zero stiffness isolator using a slotted conical disk spring as negative stiffness structure. J Vibroeng, 2014, 16: 1769–1785
Seto K. Dynamic Vibratin Absorber and Its Applications. Beijing: China Machine Press, 2013
Liu K, Liu J. The damped dynamic vibration absorbers: Revisited and new result. J Sound Vib, 2005, 284: 1181–1189
Zhou J S. Vibration and Control of Railway Vehicles. Beijing: China Railway Publishing House, 2012
Lin J H, Zhang Y H, Zhao Y. Pseudo excitation method and some recent developments. Procedia Eng, 2011, 14: 2453–2458
Lin J, Zhang W, Li J. Structural responses to arbitrarily coherent stationary random excitations. Comput Struct, 1994, 50: 629–633
Zhang Y. Spring Manual. Beijing: China Machine Press, 1997
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sun, Y., Gong, D., Zhou, J. et al. Low frequency vibration control of railway vehicles based on a high static low dynamic stiffness dynamic vibration absorber. Sci. China Technol. Sci. 62, 60–69 (2019). https://doi.org/10.1007/s11431-017-9300-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11431-017-9300-5