Abstract
Biochar has good adsorption ability to various contaminants. In this work, peanut shell, corncob, cotton stalks, and crayfish shell were pyrolyzed under three temperatures (300, 450, 600 °C) to obtain biochars for the removal of Ni2+. The biochars were further modified with 2 mol/L Na2S solution. Characterization results showed that the specific surface area and total pore volume of the modified biochars increased substantially. Among all the adsorbents, the modified corncob biochar (450 °C) showed the best Ni2+ adsorption. The adsorption kinetics followed the Elovich model with an equilibrium time of 24 h. The maximum capacity of the modified biochar reached 15.40 mg/g. The adsorption process was affected by pH, temperature, and coexisting ions. Increasing pH (under 7) provided more adsorption sites which enhanced adsorption capacity. Experimental results also indicated that the main adsorption mechanism of Ni2+ was ion exchange. Findings from this work suggest that modified biochar can be used as an effective adsorbent for the removal of Ni2+ from wastewater.
Similar content being viewed by others
References
Akhtar N, Iqbal J, Iqbal M (2004) Removal and recovery of nickel(II) from aqueous solution by loofa sponge-immobilized biomass of Chlorella sorokiniana : characterization studies. J Hazard Mater 108:85–94
Alvarez-Ayuso E, Garcia-Sanchez A, Querol X (2003) Purification of metal electroplating waste waters using zeolites. Water Res 37(20):4855–4862. https://doi.org/10.1016/j.watres.2003.08.009
Alyüz B, Veli S (2009) Kinetics and equilibrium studies for the removal of nickel and zinc from aqueous solutions by ion exchange resins. J Hazard Mater 167(1-3):482–488. https://doi.org/10.1016/j.jhazmat.2009.01.006
Argun ME (2008) Use of clinoptilolite for the removal of nickel ions from water: kinetics and thermodynamics. J Hazard Mater 150(3):587–595. https://doi.org/10.1016/j.jhazmat.2007.05.008
Banerjee SS, Jayaram RV, Joshi MV (2003) Removal of nickel(II) and zinc(II) from wastewater using fly ash and impregnated fly ash. Sep Sci Technol 38(5):1015–1032. https://doi.org/10.1081/SS-120018121
Cassidy JF, Long C (1990) Mathematical model for the measurement of pseudo-first-order rate constants in laser flash photolysis experiments. J Photochem Photobiol A Chem 54:1–10
Cheung PCP (2010) Nickel structures and methods for manufacturing the same by removal of an underlying material. US
Christensen ER, Delwiche JT (1982) Removal of heavy metals from electroplating rinsewaters by precipitation, flocculation and ultrafiltration. Water Res 16(5):729–737. https://doi.org/10.1016/0043-1354(82)90098-7
Ding Z, Hu X, Wan Y, Wang S, Gao B (2016) Removal of lead, copper, cadmium, zinc, and nickel from aqueous solutions by alkali-modified biochar: batch and column tests. J Ind Eng Chem 33:239–245. https://doi.org/10.1016/j.jiec.2015.10.007
Doumer ME, Rigol A, Vidal M, Mangrich AS (2016) Removal of Cd, Cu, Pb, and Zn from aqueous solutions by biochars. Environ Sci Pollut Res 23(3):2684–2692. https://doi.org/10.1007/s11356-015-5486-3
Frišták V, Víglašová E, Ďuriška L, Galamboš M, Moreno-Jimenéz E, Pipíška M, Soja G (2017) Sorption separation of Eu and As from single-component systems by Fe-modified biochar: kinetic and equilibrium study. J Iran Chem Soc 14:521–530
Goel J, Kadirvelu K, Rajagopal C, Garg VK (2005) Investigation of adsorption of lead, mercury and nickel from aqueous solutions onto carbon aerogel. J Chem Technol Biotechnol 80(4):469–476. https://doi.org/10.1002/jctb.1212
Guan B, Li Y, Yin B, Liu K, Wang D, Zhang H, Cheng C (2017) Synthesis of hierarchical NiS microflowers for high performance asymmetric supercapacitor. Chem Eng J 308:1165–1173
Gupta VK, Jain CK, Ali I, Sharma M, Saini VK (2003) Removal of cadmium and nickel from wastewater using bagasse fly ash—a sugar industry waste. Sep Sci 37:4038–4044
Higashikawa FS, Conz RF, Colzato M, Cerri CEP, Alleoni LRF (2016) Effects of feedstock type and slow pyrolysis temperature in the production of biochars on the removal of cadmium and nickel from water. J Clean Prod 137:965–972. https://doi.org/10.1016/j.jclepro.2016.07.205
Ho YS, Ofomaja AE (2006) Pseudo-second-order model for lead ion sorption from aqueous solutions onto palm kernel fiber. J Hazard Mater 129(1-3):137–142. https://doi.org/10.1016/j.jhazmat.2005.08.020
Ibrahim AHM, Jalbout A (2008) Molecular spectroscopic study of River Nile sediment in the greater Cairo region. Appl Spectrosc 62(3):306–311. https://doi.org/10.1366/000370208783759795
Ismail I, Soliman A, Abdel-Monem N, Ahmed HS, Sorour MH (2014) Nickel removal from electroplating waste water using stand-alone and electrically assisted ion exchange processes. Int J Environ Sci Technol 11(1):199–206. https://doi.org/10.1007/s13762-012-0158-z
Kobya M, Demirbas E, Senturk E, Ince M (2005) Adsorption of heavy metal ions from aqueous solutions by activated carbon prepared from apricot stone. Bioresour Technol 96(13):1518–1521. https://doi.org/10.1016/j.biortech.2004.12.005
Langmuir I (2015) The adsorption of gases on plane surfaces of glass, mica and platinum. J Chem Phys 40:1361–1403
Liu ZG, Zhang FS (2009) Removal of lead from water using biochars prepared from hydrothermal liquefaction of biomass. J Hazard Mater 167(1-3):933–939. https://doi.org/10.1016/j.jhazmat.2009.01.085
Long L, Xue Y, Zeng Y, Yang K, Lin C (2017) Synthesis, characterization and mechanism analysis of modified crayfish shell biochar possessed ZnO nanoparticles to remove trichloroacetic acid. J Clean Prod 166
Maciel J, Martins MC, Barbosa MA (2010) The stability of self-assembled monolayers with time and under biological conditions. J Biomed Mater Res A 94:833–843. https://doi.org/10.1002/jbm.a.32746
Mansoorian HJ, Rajabizadeh A, Bazrafshan E, Mahvi AH (2012) Practical assessment of electrocoagulation process in removing nickel metal from aqueous solutions using iron-rod electrodes. Desalin Water Treat 44(1-3):29–35. https://doi.org/10.1080/19443994.2012.691708
Mattigod SV, Rai D, Felmy AR, Rao L (1997) Solubility and solubility product of crystalline Ni(OH) 2. J Solut Chem 26(4):391–403. https://doi.org/10.1007/BF02767678
Mohan D, Rajput S, Singh VK, Steele PH, Pittman CU (2011) Modeling and evaluation of chromium remediation from water using low cost biochar, a green adsorbent. J Hazard Mater 188(1-3):319–333. https://doi.org/10.1016/j.jhazmat.2011.01.127
Mohan D, Sarswat A, Ok YS, Jr PC (2014) Organic and inorganic contaminants removal from water with biochar, a renewable, low cost and sustainable adsorbent—a critical review. Bioresour Technol 160:191–202. https://doi.org/10.1016/j.biortech.2014.01.120
Mosa A, El-Banna MF, Gao B (2016) Biochar filters reduced the toxic effects of nickel on tomato (Lycopersicon esculentum L.) grown in nutrient film technique hydroponic system. Chemosphere 149:254–262. https://doi.org/10.1016/j.chemosphere.2016.01.104
Ng C, Losso JN, Marshall WE, Rao RM (2002) Freundlich adsorption isotherms of agricultural by-product-based powdered activated carbons in a geosmin-water system. Bioresour Technol 85(2):131–135. https://doi.org/10.1016/s0960-8524(02)00093-7
Olayo MG, Zúñiga R, González-Salgado F, Gómez LM, González-Torres M, Basurto R, Cruz GJ (2016) Structure and morphology of plasma polyfuran particles. Polym Bull 74(2):571–581. https://doi.org/10.1007/s00289-016-1730-3
Qi X, Li L, Tan T, Chen W, Jr SR (2013) Adsorption of 1-butyl-3-methylimidazolium chloride ionic liquid by functional carbon microspheres from hydrothermal carbonization of cellulose. Environ Sci Technol 47(6):2792–2798. https://doi.org/10.1021/es304873t
Rosengren Å, Pavlovic E, Oscarsson S, Krajewski A, Ravaglioli A, Piancastelli A (2002) Plasma protein adsorption pattern on characterized ceramic biomaterials. Biomaterials 23(4):1237–1247. https://doi.org/10.1016/S0142-9612(01)00244-7
Sandau E, Sandau P, Pulz O (2010) Heavy metal sorption by microalgae. Acta Biotechnol 16:227–235
Sepúlveda-Escribano ZA-e A, Wahby A, Silvestre-Albero J, Rodríguez-Reinoso F (2014) Activated carbons impregnated with Na2S and H2SO4 texture, surface chemistry and application to mercury removal from aqueous solutions. Adsorpt Sci Technol 32:101
Seredych M, Bandosz TJ (2011) Removal of dibenzothiophenes from model diesel fuel on sulfur rich activated carbons. Appl Catal B Environ 106:133–141
Shigehisa T, Inoue T, Kumagai H (2015) Mathematical model of the water sorption kinetics of UBC. Fuel Process Technol 137:194–203
Shukla SS, Li JY, Dorris KL, Shukla A (2005) Removal of nickel from aqueous solutions by sawdust. J Hazard Mater 121(1-3):243–246. https://doi.org/10.1016/j.jhazmat.2004.11.025
Skryleva EA, Kubasov IV, Kiryukhantsev-Korneev PV, Senatulin BR, Zhukov RN, Zakutailov KV, Malinkovich MD, Parkhomenko YN (2016) XPS study of Li/Nb ratio in LiNbO 3 crystals. Effect of polarity and mechanical processing on LiNbO 3 surface chemical composition. Appl Surf Sci 389:387–394. https://doi.org/10.1016/j.apsusc.2016.07.108
Sohn JR, Park WC (2003) The roles of active sites of nickel sulfate supported on gamma-Al2O3 for ethylene dimerization. Appl Catal A Gen 239(1-2):269–278. https://doi.org/10.1016/S0926-860X(02)00392-7
Vaughan T, Seo CW, Marshall WE (2001) Removal of selected metal ions from aqueous solution using modified corncobs. Bioresour Technol 78(2):133–139. https://doi.org/10.1016/S0960-8524(01)00007-4
Villaescusa I, Fiol N, Martínez M, Miralles N, Poch J, Serarols J (2004) Removal of copper and nickel ions from aqueous solutions by grape stalks wastes. Water Res 38(4):992–1002. https://doi.org/10.1016/j.watres.2003.10.040
Wang DC, Xia ZZ, Wu JY, Wang RZ, Zhai H, Dou WD (2005) Study of a novel silica gel–water adsorption chiller. Part I. Design and performance prediction. Int J Refrig 28(7):1073–1083. https://doi.org/10.1016/j.ijrefrig.2005.03.001
Wang H, Gao B, Wang S, Fang J, Xue Y, Yang K (2015) Removal of Pb(II), Cu(II), and Cd(II) from aqueous solutions by biochar derived from KMnO4 treated hickory wood. Bioresour Technol 197:356–362. https://doi.org/10.1016/j.biortech.2015.08.132
Xu Y, Zhao D (2007) Reductive immobilization of chromate in water and soil using stabilized iron nanoparticles. Water Res 41(10):2101–2108. https://doi.org/10.1016/j.watres.2007.02.037
Xue YW, Gao B, Yao Y, Inyang M, Zhang M, Zimmerman AR, Ro KS (2012) Hydrogen peroxide modification enhances the ability of biochar (hydrochar) produced from hydrothermal carbonization of peanut hull to remove aqueous heavy metals: batch and column tests. Chem Eng J 200:673–680. https://doi.org/10.1016/j.cej.2012.06.116
Yavuz O, Altunkaynak Y, Guzel F (2003) Removal of copper, nickel, cobalt and manganese from aqueous solution by kaolinite. Water Res 37(4):948–952. https://doi.org/10.1016/s0043-1354(02)00409-8
Yorgun S, Yıldız D (2015) Preparation and characterization of activated carbons from Paulownia wood by chemical activation with H3PO4. J Taiwan Inst Chem Eng 53:122–131. https://doi.org/10.1016/j.jtice.2015.02.032
Acknowledgements
This work was partially supported by the National “Twelfth Five-Year” Plan for the Science & Technology Pillar Program (grant numbers 2014BAL04B04 and 2015BAL01B02), the Fundamental Research Funds for the Central Universities (no. 2042016kf0173), and the Wuhan Water Engineering & Technology Co., Ltd. The authors also thank the anonymous reviewers for their invaluable insight and helpful suggestions.
Author information
Authors and Affiliations
Corresponding author
Additional information
Responsible editor: Guilherme L. Dotto
Highlights
a. A new modification method is used in this paper.
b. The maximum adsorption capacity of Ni2+ was 15.40 mg/g.
c. The adsorption mechanism was studied by using various characterizations.
Rights and permissions
About this article
Cite this article
Hu, X., Xue, Y., Liu, L. et al. Preparation and characterization of Na2S-modified biochar for nickel removal. Environ Sci Pollut Res 25, 9887–9895 (2018). https://doi.org/10.1007/s11356-018-1298-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11356-018-1298-6