Abstract
A Monte Carlo approach is developed for the layout design of thermal fire detection system. In contrast to the traditional deterministic approach, the present approach yields not only a specific design for a given objective, but also a probabilistic assessment of the effectiveness of the design which can be used as a basis of comparison for different possible designs. The approach also allows a systematic assessment of the uncertainty in the design process and provides a rational basis for possible design improvements.
Similar content being viewed by others
References
R.L. Alpert, “Calculation of Response Time of Ceiling-Mounted Fire Detector,” Fire Technology, vol. 8, 1972, pp. 181–195.
C.L. Beyler, “A Design Method for Flaming Fire Detection,” Fire Technology, vol. 20, no. 4, 1984, p. 4.
British Standards Draft to Development DD 240, Fire Safety Engineering in Buildings, Part 1, Guide to the Application of Fire Safety Engineering Principles, London: British Standards Institution, 1997.
P. Burry, Fire Detection and Alarm Systems, A Guide to the BS Code, BS 5839: Part 1, 2nd edition, Paramount Publishing Ltd, 1996.
W.K. Chow and W.Y. Hung, “Green Building Conference 2002: Architecture Features for the Environmental Friendly Century,” New Symbiotic Building and Environmental Technology–-The Future Scope in Subtropical Region, 23–25, 2002, Oslo, Norway (accepted to present).
CIBSE Guide E, Fire Engineering, The Chartered Institution of Building Services Engineers, 1997.
G.V. Hadjisophocleous, N. Bénichou, and A.S. Tamin, “Literature Review of Performance-Based Codes and Design Environment,” Journal of Fire Protection Engineering, vol. 9, no. 1, 1998, pp. 12–40.
G. Heskestad and R.G. Bill, “Qualification of Thermal Responsiveness of Automatic Sprinklers Including Condition Effects,” Fire Safety Journal, vol. 14, 1988, pp. 113–125.
G. Heskestad and M.A. Delichatsios, “Environment of Fire Detectors Phase I: Effects of Fire Size, Ceiling Height and Material,” Vol. II–-Analysis, Technical Report Serial No. 22427, RC 77-T-11, Factory Mutual Research Corporation, MA, 1977.
G. Heskestad and H. Smith, “Plunge Test for Determination of Sprinkler Sensitivity,” Research Report JI 3A 1E2RR, Factory Mutual Research Corporation, Norwood Ma, USA, 1980.
W.D. Moore, “Automatic Fire Detectors,” Section 5/Chapter 2, A.E. Cote, P.E., Fire Protection Handbook, 18th edition, Quincy, Massachusetts: National Fire Protection Association, 1997.
R.P. Schifiliti, “Use of Fire Plume Theory in the Design and Analysis of Fire Detector and Sprinkler Response,” Master’s Thesis, Worcester Polytechnic Institute, Worcester, MA, 1986.
R.P. Schifiliti, B.J. Meacham, and R.L.P. Custer, “Design of Detection Systems,” SFPE Handbook of Fire Protection Engineering, 3rd edition, Section 4, Chapter 1, pp. 4-1-4-44, Quincy, Ma, USA: Society of Fire Protection Engineers, National Fire Protection Association, Inc., 2002.
SFPE Engineering Guide to Performance-Based Fire Protection Analysis and Design of Buildings, Quincy, MA: Society of Fire Protection Engineers and National Fire Protection Association, 2000.
D.W. Stroup and D.D. Evans, “Use of Computer Fire Models for Analyzing Thermal Detector Spacing,” Fire Safety Journal, vol. 14, 1988, pp. 33–45.
D.W. Stroup, D.D. Evans, and P. Martin, NBS Special Publication 712, National Bureau of Standard, Gaithersburg, 1986.
I.N. Sneddon, M. Stark, and S. Ulam (eds.), “The Monte Carlo Method,” International Series of Monographs in Pure and Applied Mathematics, vol. 87, 1966.
E.E. Zukoski, T. Kubota, and B. Cetegan, “Entrainment in Fire Plumes,” Fire Safety Journal, vol. 3, 1980, pp. 107–121.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Yuen, W.W., Chow, W.K. A Monte Carlo Approach for the Layout Design of Thermal Fire Detection System. Fire Technol 41, 93–104 (2005). https://doi.org/10.1007/s10694-005-6389-5
Issue Date:
DOI: https://doi.org/10.1007/s10694-005-6389-5